2022 SDP EZ HAULER 55MLP
£129,883
Localização da máquina:13620 FM 2710Lindale, Texas, EUA 75771
Informações do vendedor
View Seller InformationGeral
Ano
2022
Fabricante
Horas
146
Modelo
Condição
Usado
Número de Estoque
RS22017
Descrição
2022 S.D.P. Manufacturing EZ Hauler 55MLP
Machine Overview:
• EZ Hauler Track Unit, Self-storing Auger, hyd. 3rd stage boom, pole guide & front telescopic outriggers. Remote drive and throttle controls, two speed drive, Yanmar 3 cyl. Minimax Tier IV Final engine
• 5500LP EZHauler crane per SDP specs.
• Yanmar Minimax Diesel Engine, Tier IV Final
• 33rpm @ 3500 ft. lb. Torque Auger drive head, (2" hex output shaft)
• 25 FT. cable for CAN/Charger for orange "joystick" remote control transmitter. Charges while operating from direct connection
• Hydraulic Pole Guides
• Track Interlock Safety System
• Battery
• 5’ Hex Variable Length Extension (Kelly Bar)
• 18” Auger Bit with Roll-Up Guide, Carbide Teeth, Wind Up Stud & Fishtail Point
• 9/16 x 100’ Winch Rope
• 3-Position detented, 4-way, manual, lever operated, hydraulic valve relief both ports, adjustable from 1500-3000 psi
• Auger Store on Side of Boom
• Stable to 20 Degree Slope
• Operator & Parts Manuals
General Specifications:
• Engine: Yanmar Mnimax, 3 Cylinder, Water cooled 1640 cc Diesel 25 HP @ 3600 RPM. Fully tier IV compliant
• Hydraulic Pump: Fixed displacement gear type, 14 gallons (53 liters) per minute
• Drivetrain: Hydraulic track drive with skid steering
• Rubber Tracks: Hydraulically extended tracks
• Sheave Height: 42’ Boom Tip
• Rotation: Full 360 degree continuous rotation
• Lifting Capacity: 5500 lb. (1725 kg)
• Remote Control: Fully proportional for crane and drive functions
• ANSI: Meets or Exceeds A92.2-2001, A10.31-2006, and SAE Requirement
• Insulated: Meets 46kv category C dielectric qualifications
Dimensions:
• Chassis Length: 10’6”
• Overall Length Including Crane: 17’
• Width-Tracks Retracted: 35.5”
• Width-Tracks Extended: 51”
• Height: 6’10”
• Track Length: 7’
• Track Type: Rubber (Black)
Additional Options:
Pin-On Bucket Assembly:
• 24x24x24 Fiberglass Bucket with Step Access
• Leveling System with Outrigger Interlocks
• Bucket Liner (Rated at 50KV)
• Vinyl Bucket Cover
• (Qty: 4) 16” Outrigger Pads with Hand Hole Cutouts
• Pin-On Fiberglass Bucket Assembly Jib
$ 11,250.00
Pin-On Transformer Jib with Winch:
• Transformer Jib with Hydraulic Winch
• Requires Tool Circuit & Hose Reel(Pricing Below)
$ 12,500.00
Tool Circuit & Hose Reel:
• Lower Tool Circuit with Hose Reel
$ 2,600.00
Support Trailer:
• 21’Long, 8’ Wide- 17,500 GVWR Tandem Axle Trailer
• 8 Lug EZ-Lube 9,000lb Axles
• Vehicle Identification Number
• 10K Capacity Drop Leg Jack
• Aluminum Tool Box: 60” Long, 18” High, 10” Wide with 2 Lock Hasp & Paddle Latch
• 12 Gauge Diamond Tread Plate w/10” Skirt Fenders
• 6 Pole Pigtail Trailer Cord
• Tie Down D-Rings
• Spare Tire Mounting assembly with Tire & Rim
• Pin-On Fiberglass Bucket & Assembly Jib holder
$ 15,500.00
Categoria Específica
Guincho
Sim
Número de guinchos
1
estabilizadores
Sim
Número de Estabilizadores
2
Diâmetro da broca
45.72 centimetros
Exterior
ROPS (Estrutura de Proteção Contra Capotamento)
Não Possui
Motor
Potência
25 HP